Contact Us
Tel : +86 574 81914992
Fax : + 86 574 56877662
Msn : zynddp@hotmail.com
Skype : topocapacitor
Icq : 644-736-346
E-mail : sales@topo-capacitor.com
Contact person : Lee / Ken / Connie
TOPO GROUP CO., LTD >  BSMJ Power Capacitor

BSMJ Power Capacitor

BSMJ Power Capacitor





 

 

 

Description

BSMJ Self-Healing type low voltage shunt capacitor, applied thd advanced ZN-AL complesed metallized film,adopted foreign dvanced production techology techniques.the products is mainly suitable for low voltage electric network to improve power factor, reduce reactive loss, and improve the electric network quality,transmission equipment to increase transmission capacity. The product conforms to the standard requirements of international electrician committee GB12747-2004 IEC60831-1996. The capacitor is suitable for parallel connect with load in AC electric power system with 50Hz or 60Hz, rated voltage 1000V or below it in order to improve the power factor.

 

Feature

1. Compacted and light: Its volume and weight are only 1 / 4 and 1 / 5 of the old productbecause of the using of a new dielectric-metallized poly prop ylene film.

2. Low loss: The real figure is lower than 0.10%, so the loss of the capacitor it self is extremely low, theheat it gives out is little and the rise of temperature is low, so its service life is very long and it can save energy at the same time.

3. Excellent self-healing ability: Damage of part of the dielectric caused by over-voltage can be self-healed quickly and return to normal state. So the reliability is much higher.

4. Safety: In wardly equipped self-discharge resistor and safety equipment. The selfdischarge resistor can automatically discharge the electric energy the capacitor carries. If there is anything fault with the capacitor, the safety equipment will cut off power in time, thus prevent further troubles from happening. So it smuchsafer touse this kind of capacitor.

5. No oil leakage: The capacitor uses advanced semi-soild impregnant whose dripmelting point it above 70℃. There will be no loss of oil during the course of using it. And thus protect the surroundings from being polluted. The capacitor itself dosenot have to run the risk of invalidation caused by oil leakage.

 

Technical data and specifications

 Reference standards  GB12747-2004 IEC60831-1996
 Rated voltage  250VAC, 400VAC, 525VAC, 690VAC, 750VAC, 1050VAC
 Service conditions  ambient temperature -25℃ ~+50℃ , humidity ≤85%RH, and altitude lower than 2000m.
 Rated output  1 ~ 100Kvar
 Tolerance  -5 ~ +10%
 Over current  1.3 × In
 Flowing current  200 times rated current
 Tolerance  ± 3%
 Dissipation factor tan δ  With the power frequency rated voltage, tg≤ 0.1% at 20℃.
 Withstand voltage  Between terminals 2.15 times rated voltage for 10 seconds,
between terminals and container 3k VACfor 10seconds.
 Max permissible over-voltage  110% rated voltage.
 Max permissible over-current  130% rated current.

 Model (BSMJ)

 Rated Volume (KVAR)

 Rated Voltage (VAC)

 Rated Current (A)

 Rated Capacity (uF)

 Size (mm) LxWxH

 Installation Size (mm)

 0.4-5-3

 5

 400

 3x7.2

 3x33

 180x64x135

 190x44

 0.4-7.5-3

 7.5

 400

 3x10.8

 3x50

 180x64x135

 0.4-10-3

 10

 400

 3x14.4

 3x66

 180x64x135

 0.4-12.5-3

 12.5

 400

 3x18

 3x83

 180x64x190

 0.4-15-3

 15

 400

 3x21.7

 3x100

 180x64x190

 0.4-16-3

 16

 400

 3x23

 3x106

 180x64x190

 0.4-20-3

 20

 400

 3x29

 3x133

 180x64x210

 0.4-22.5-3

 22.5

 400

 3x32.5

 3x149

 180x64x210

 0.4-25-3

 25

 400

 3x36

 3x166

 180x64x270

 0.4-30-3

 30

 400

 3x43.3

 3x199

 180x64x270

 0.44-5-3

 5

 440

 3x6.6

 3x27.4

 180x64x135

 190x44

 0.44-7.5-3

 7.5

 440

 3x9.8

 3x41.1

 180x64x135

 0.44-10-3

 10

 440

 3x13.1

 3x54.8

 180x64x135

 0.44-12.5-3

 12.5

 440

 3x16.4

 3x68.5

 180x64x135

 0.44-15-3

 15

 440

 3x19.7

 3x82.2

 180x64x190

 0.44-16-3

 16

 440

 3x21

 3x87.7

 180x64x190

 0.44-20-3

 20

 440

 3x26.2

 3x109.6

 180x64x190

 0.44-22.5-3

 22.5

 440

 3x29.5

 3x123.3

 180x64x210

 0.44-25-3

 25

 440

 3x32.8

 3x137

 180x64x210

 0.44-30-3

 30

 440

 3x39.4

 3x164.4

 180x64x270

 0.525-5-3

 5

 525

 3x5.5

 3x19.2

 180x64x135

 190x44

 0.525-7.5-3

 7.5

 525

 3x8.2

 3x28.9

 180x64x135

 0.525-10-3

 10

 525

 3x11

 3x38.5

 180x64x135

 0.525-12.5-3

 12.5

 525

 3x13.7

 3x48.1

 180x64x190

 0.525-15-3

 15

 525

 3x16.5

 3x57.7

 180x64x190

 0.525-16-3

 16

 525

 3x17.6

 3x61.6

 180x64x190

 0.525-20-3

 20

 525

 3x22

 3x77

 180x64x210

 0.525-22.5-3

 22.5

 525

 3x24.7

 3x86.6

 180x64x210

 0.525-25-3

 25

 525

 3x27.5

 3x96.2

 180x64x270

 0.525-30-3

 30

 525

 3x33

 3x115.5

 180x64x270

 0.69-5-3

 5

 690

 3x4.2

 33

 180x64x135

 190x44

 0.69-7.5-3

 7.5

 690

 3x6.3

 50

 180x64x135

 0.69-10-3

 10

 690

 3x8.4

 66

 180x64x135

 0.69-12.5-3

 12.5

 690

 3x10.5

 83

 180x64x190

 0.69-15-3

 15

 690

 3x12.6

 100

 180x64x190

 0.69-16-3

 16

 690

 3x13.4

 106

 180x64x190

 0.69-20-3

 20

 690

 3x16.7

 133

 180x64x210

 0.69-22.5-3

 22.5

 690

 3x18.8

 149

 180x64x210

 0.69-25-3

 25

 690

 3x21

 166

 180x64x270

 0.69-30-3

 30

 690

 3x25.1

 199

 180x64x270

 

 

Note: Can be manufactured according to customer's request.